UMT™ 200 & 300 Series Sorters

The UMT™ 200 & 300 Series 24" diameter Bi-Sorter & Tri-Sorter is installed below the buildings trash chute which will then allow the sorting mechanism to divert trash to a compactor or container and recyclables to a dedicated container. The diverter is controlled at each intake floor. The user selects the desired sorting type with the push button. If the sorter system is installed with our Easy-Wave® interlock system the selection buttons will be integral with the system.

The UMT™ 200 & 300 Series 24" diameter Bi-Sorter & Tri Sorter was designed for multistory buildings that wish to sort recyclables away from the buildings trash with a single chute system.

- The sorter body is constructed of ¼" thick steel which is continuously welded and has a powder coat finish.
- The diverter plate is constructed of ½" thick heavy duty grade aluminum.
- Support legs are adjustable to accommodate various compactors and containers.

- The main control panel runs 115VAC nominal / 6 Amps maximum.
- All controls are 24 Volt DC.
- Main controller has a 32 character backlit LCD display.
- All electrical components are UL listed.
- Sensor based operation - No mechanical limit switches to fail or go out of adjustment.
- System status is displayed at all times.
- Access door is safety interlocked to disable sorter when opened.
- Optional bin full sensors - Sorter is locked out when bin is full.
- Optional bin present sensor - Sorter locked out if bin is not present.
- All mechanical parts are enclosed to eliminate pinch point injuries.

Contact Us For More Information